Header

buy Korea

Water-based release agent for concrete/CORAX (OT9/CX19/NOX73)(Pd No. : 65858)

(Updated : Apr/23/2014)
product information
Model Nm
HS CODE 340319
M.O.Q 1 ton
Ceritification
Keywords Water-based Release Agent
Seller ID ddo3230
Payment Card Master VISA JCB

CORAX OT9/CX19/NOX73

Water based-Concrete release agents

Wet cast type

  

DESCRPTION

OT9/CX19/NOX73 mold release is an emulsion of natural, biodegradable water based product that will minimize surface defects with no air holes and provide a quick, easy release of concrete from molds. This environmentally friendly formula will not stain or discolor the surface of concrete. OT9/CX19/NOX73 can be used on metal, wood, aluminium, rubber molds

 

TECHNICAL DATA (OT9)

  • Viscosity : 50~300cps
  • Color: milky white
  • Freeze point: below -5℃
  • Boiling point: 100℃ approx.
  • Vapour pressure: as for water
  • Flash point: not available
  • Solubility in water: fully miscible with water
  • PH: 7
  • VOC content: 0.55g/L
  • Chemical reactivity: low
  • Active content: 55%approx
  • Ion: Anionic

 

APPLICATION

  • OT9: General form type
  • OT9R: Ready-to-use products
  • CX19: Spinning type/ Hume pipe (spun pipe)
  • NOX73: Spinning type/ Concrete pile

 

ADVANTAGE

Excellent Economical Easy

  • High dilution rate.
  • Elimination of health  risks with petrochemicals 
  • Ready to use from container simply add to the mixing water.
  • Environmentally friendly.
  • None flammable
  • Molds can be cleaned with water.
  • Maintains original concrete color
  • Minimizes bugsholes, stains, build ups.
  • Little or no odor
  • Long shelf life
  • Biodegradable
  • Non carcinogenic
  • Forms sprayed minutes or days prior to placing concrete.
  • No wash off in moderate rain
  • Application in sub freezing temperatures.

 

RECOMMENDED DOSAGE

OT9/CX19/NOX73 is very economical version of mold release agents. It shall be diluted with water before use.

 

METHOD OF USE

Clean all surface prior to application of OT9/CX19/NOX73. Agitate before use. OT9/CX19/NOX73 can be applied via spraying, brushing, rollingon the molds in thin, even layers for maximum performance and economy.

 

PRECAUTIONS

  •  Protect from freezing; store at -5℃ or above.
  • (if freezed, use after well melted)
  •  Clean molds for no stains.
  •  Keep out of direct sunlight.

 

METHOD OF DILUTION

  •  Simply dilute by stirring for a few seconds.
  •  Can be diluted by water pump, dilutioner.

 

METHOD OF SPRAY

  •  Spray thoroughly in detailed manner.
  •  Liquid agent will not seep through.

 

PACKING

  •  IBC Tank (1,000L)
  • Drum (200L)
  • Container (20L)
  • Flexi tank (18,000L)

 

MANUFACTURER

J.ONE CO., LTD

252 Sanjeon-ri Dunpo-myeon, Asan-Si, Chungnam,  Rep of KOREA
Tel: +82-41-531-7920

Fax: +82-41-531-7923
Website:
www.jonechem.com

E-mail: dooy@jonechem.com

 

 

YouTube PLAY

Company Information

company information
Contact Person Dooyeon Park
Company J, ONE Co., Ltd
Address
Homepage www.jonechem.com , http://seller.buykorea.org/j-one--1006849
Tel 0415317920 Fax 0415317923
Biz. Type Est. Year
Employees Annual Export USD 0~1 mn
Related Business Event List

Data not found

Go to the top of the page
Loading...